The Self-Care button is light up and the other buttons are alternatively lighting upUpdated a month ago
This can be due to any of the following reasons:
- THE FILTER IS ALREADY USED UP - The installed filter is already used up.
- BLOCKAGE AND CHOKING IN THE PIPES - There could be a blockage in the water flow causing it to choke.
- VALVE NEEDS REPLACEMENT.
To help resolve the issue under these other causes, please check the following:
- IF THE FILTER HAS RECENTLY BEEN CHANGED WITHIN ThE PAST 6 MONTHS OR LESS
- If the filter has been changed recently, this may be due to choking or needs a valve replacement. Please take a video (30 seconds to 1 minute) clearly showing the touch panel of the machine. Once done, please get in touch with our customer support team at https://support.sterra.sg/en-US/ssp/login and send the video for further help.
- IF THE FILTER HASN'T BEEN CHANGED FOR 6 MONTHS OR MORE
- The filter has to be changed first to rule out the problem of the filter being used up.
Filter Replacement Guidelines
- Open the filter cover.
- Turn the inlet valve on the side to the 12 o'clock position.
- Lift up the existing filter and pull it down to remove it. Some water may drip a little bit.
- Insert a new filter with the same label into the fitting and push down.
- [VERY IMPORTANT] Turn the inlet valve on the side to the 3 o'clock position and open the valve.
- Close the filter cover.
- To activate flushing, press and hold "Self Care + Ambient" for 5 seconds.
- Flushing will start and the dispense button will be blinking.
- Wait about 15 minutes and all lights on the machine will turn off. This means flushing is done.
- To reset the filter, press and hold the "Dispense + Ambient" button for 3 seconds.
If you follow these steps and your water purifier's water flow is still slow, please take a video (30 seconds to 1 minute) clearly showing the problem. Once done, please get in touch with our customer support team at https://support.sterra.sg/en-US/ssp/login and send the video for further help. We are here to assist you in resolving any issues. Thank you!